Manuals, Service Bulletins, and Service Information Letters for RSA and Silver Hawk EX Fuel Injection Systems |
Regulator Hex Plug: Information about the Regulator Hex Plug Inspection (AD 2008-08-14) is available here. The page includes a list of related publications. |
|
Adobe Acrobat Reader is required to view these
publications. If you don't have it, you can download it for free here.
Publication dates are in [MM-DD-YY] format. Page last updated on: 6-25-09 |
| Manuals | Silver Hawk EX Publications | ||
| General Publications | Manufacturers' Service Bulletins | ||
| RSA Publications | |||
| Subscription Service | |||
| Service Bulletins | |||
| Service Information Letters | |||
| Manuals | |
| 15-895_X | Index of Manuals, Bulletins, and
Service Information Letters |
| 15-810_B | |
| 15-812_B | |
| 15-901_C | Installation Troubleshooting
Chart -- RS/RSA Fuel Injection Systems |
| General Publications | |
| SIL PAC-1 Rev6 | Warranty Repair of Precision Airmotive RSA Fuel Injection Systems and MSA Float Carburetors [9-14-06] |
| Return to Top |
| RSA Subscription Service | |
| GEN1117_I1108.pdf | Order / Re-order Form |
| RSA Service Bulletins | |
| RS-20 Rev2 | Bendix Fuel Injection
System, |
| RS-43 | Flow Dividers for Bendix Fuel
Injection Systems, Inspection and Modification Of
|
| RS-44 | Bendix Fuel Injection System,
Model RSA-5AD1, Modification Of
|
| RS-45 Rev1 | Bendix Fuel Injector System -
RSA-10ED1 Basic No. |
| RS-46 | Bendix Fuel Injector System with
Bellows-Type Body Seal, Modification Of: |
| RS-47 | Incorporation of Revised Mixture
Control Stem Bushing |
| RS-48 Rev2 | The 100 Percent Replacement of
Fuel Inlet Strainers at Each Overhaul
|
| RS-49 | Modification of Bendix Fuel
Injection Model |
| RS-50 | Bendix Fuel Injector System
Inspection and Modification
|
| RS-51 | Rework of Fuel Pressure Fitting
P/N 2538997 for Models |
| RS-52 Rev3 | Bendix Fuel Injector System with
Bellows-Type Body Seal, Modification Of: |
| RS-53 Rev3 | Bendix Fuel Injector System with
Bellows-Type Body Seal, Modification Of: Model |
| RS-54 Rev3 | Bendix Fuel Injector System with
Bellows-Type Seal, Modification Of: |
| RS-55 Rev1 | Bendix Fuel Injector System with
Bellows-Type Seal Modification Of: |
| RS-56 Rev1 | The Modification of Fuel
Injector System Model |
| RS-57 Rev1 | Inspection of Fuel Diaphragm
Assembly P/N 2529471 on all |
| RS-58 Rev3 | Bendix Fuel Injector System with
Bellows-Type Seal, Modification of |
| RS-59 Rev1 | Bendix Fuel Injector System with
Bellows-Type Body Seal, Modification Of: Model |
| RS-60 Rev1 | Bendix Fuel Injector System with
Bellows-Type Seal Modification Of: |
| RS-61 Rev1 | Bendix Fuel Injector System with
Bellows-Type Body Seal, Modification Of: |
| RS-62 Rev2 | Modification of Mixture
Control Shaft Assembly on Model |
| RS-63 | Inspection of Fuel Diaphragm
Assembly P/N 2529293 on all |
| RS-65 | Modification of Mixture
Control Shaft Assembly on All |
| RS-66 Rev1 | Bendix Fuel Injector System,
Modification of Idle Valve Assembly on Model |
| RS-71 Rev1 | Redesign of the
Locking Method of the Regulator Stem Nut on All Model RSA Fuel Injectors
|
| RS-72 | Fuel Injector,
Model |
| RS-73 | Distributor Valve
Assembly, Parts List |
| RS-74 Rev1 | Nozzle Assembly,
Air Bleed, P/L |
| RS-75 | Bendix Fuel
Injector Model |
| RS-76 Rev1 | Update of Various
Components of the RS-Series Fuel Injection Systems Affected by Diaphragm
and Packing Material Change to Fluorosilicone
|
| RS-77 Rev2 | Air Bleed Nozzle,
RS-RSA Fuel Injection Systems, Two Piece Assembly
|
| RS-78 | Bendix Fuel
Injection System, Model |
| RS-79 | Bendix Fuel
Injection System |
| RS-80 | Modification of
Mixture Control Shaft Assembly on Model |
| RS-81 | Fuel Injector,
Model |
| RS-82 | Bendix Fuel
Injection System, |
| RS-83 Rev1 | Bendix Fuel
Injection System, Modification of: |
| RS-84 | Bendix Fuel
Injector System, Modification of: |
| RS-85 | Bendix Fuel
Injection System, Models |
| RS-86 | Bendix Fuel
Injector System, Models |
| RS-87 | Bendix Fuel
Injection System, Model |
| RS-88 | Bendix Fuel
Injection System, Models |
| RS-89 | Bendix Fuel
Injection System, Model |
| RS-90 | Bendix Fuel
Injector System, Model |
| PRS-91 | Bendix Fuel Injector
System, Model |
| PRS-92 | Contamination in Bendix Fuel Injector
System, Model |
| PRS-93 | Contamination in Bendix Fuel Injector
System, Model |
| PRS-94 | Bendix Fuel Injection
System, Model |
| PRS-95 | Bendix Fuel Injection
System, Model |
| PRS-96 | Recall Of Flow Divider, Part
Number |
| PRS-97 Rev1 | Overhaul Periods for RS/RSA Fuel
Injection System Components |
| PRS-98 | Mandatory Inspection and
Replacement of Rubber Center Body Seals Used on RSA Injectors |
| PRS-99 | Use of Unauthorized Parts in
Precision Airmotive Fuel Injection Systems |
| PRS-100 | Goode Engineering Corporation
Notification Letters Dated April 27, 1993 and May 27, 1993 Regarding
Diaphragm Replacement Kit for GE2541803 and GE2538420 |
| PRS-101 | Recall of Fuel Injector Nozzle
Assemblies, Part Numbers 2541946, |
| PRS-102 | Unapproved Parts Used In RSA Fuel Injection Systems
|
| PRS-103 | RSA-10 Fuel Diaphragm Assembly,
Part Number 2541803 |
| PRS-104 | Australian |
| PRS-105 Rev1 | Servo Metered Fuel Pressure Port
Leakage |
| PRS-106 Rev1 | Servo Recall -- Part Number
|
| PRS-107 Rev4 | Hex Plug
383493 Coming Loose From Regulator Cover |
| PRS-107 Serial
Number Listing (Excel or compatible program required to view) |
|
| Warranty Request Form for Service Bulletin PRS-107 [3-17-08] | |
| PRS-107 AMOC Approval for AD 2008-08-14 [4-28-08] | |
| Return to Top |
| RSA Service Information Letters | ||
| SIL-9 Rev1 | Service
Limits |
|
| SIL-10 | RSA Fuel
Injector Center Body Versus Center Body Assembly |
|
| SIL-13 | RSA Fuel
Injector Regulator Brass Hex Plug P/N 383493 |
|
| SIL-16 Rev2 | RS and
RSA Fuel Injectors, Manual Mixture Control, Leakage |
|
| SIL-17 Rev1 | Tooling
Change for All RSA Fuel Injectors |
|
| SIL-18 Rev1 | Calibration
Flow Bench Limits for RSA Model Injectors |
|
| SIL-19 Rev1 | Material
Change to Fluorosilicone |
|
| SIL RSA-20 | Automatic
Mixture Control Flow Test Limits |
|
| SIL-21 | Introduction
of Aluminum Hardcoated Manual Mixture Control Valves in RSA Model Fuel Injectors |
|
| SIL-22 Rev1 | RS/ RSA
Identification Plates |
|
| SIL-23 | RSA Fuel
Injectors, Fuel Diaphragm Assembly Change |
|
| SIL-24 | Replacement
of Fuel Diaphragm Assemblies in |
|
| SIL-25 | Disassembly
of Regulator Portion of All RSA Fuel Servo Units |
|
| SIL-26 | Inspection
of Bullet-Type Venturies Used in |
|
| SIL-27 | 100
Percent Replacement of Gaskets, Synthetic Rubber Packings, Center Body
Bellows Asemblies, Inlet Fuel Filters and Diaphragms at Overhaul |
|
| SIL-28 | Modification
of |
|
| SIL-29 | Untitled
(Sale of Bendix Model RS/RSA Product Line to Precision Airmotive
Corporation) |
|
| SIL-30 | Notification
of Obtaining RS/RSA Publications from Precision Airmotive Corporation |
|
| SIL-31 Rev1 | Contamination in
Bendix Fuel Injector System |
|
| SIL-32 | Contamination in
Bendix Fuel Injector System |
|
| SIL-33 | Automatic
Mixture Control Flow Test Limits |
|
| SIL RS-34 | Use of Unauthorized Parts in Precision Airmotive Fuel Injection Systems [10-22-92] | |
| SIL RS-35 Rev1 | Alternate Flow Test Bench Fluid
- |
|
| SIL RS-36 Rev1 | Service Information for
|
|
| SIL RS-37 | Service
Information for RSA-10DB1 Fuel Injection Servo Parts List |
|
| SIL RS-38 Rev1 | Service Information for
|
|
| SIL RS-39 Rev2 | Service Information for |
|
| SIL RS-40 Rev1 | Service Information for |
|
| SIL RS-41 | Service
Information for RSA-10DB1 Fuel Injection Servo Parts List |
|
| SIL RS-42 | Service Information for |
|
| SIL RS-43 | Service Information for |
|
| SIL RS-44 Rev1 | Service Information for |
|
| SIL RS-45 | Rework Instructions for |
|
| SIL RS-47 Rev2 | Service Information for
|
|
| SIL RS-48 Rev1 | Service Information for |
|
| SIL RS-49 | Service Information for |
|
| SIL RS-50 Rev1 | Service Information for |
|
| SIL RS-51 | Service Information for |
|
| SIL RS-52 | Service Information for |
|
| SIL RS-53 | Service Information for |
|
| SIL RS-55 | Identification and Cure Dating
of Rubber Products |
|
| SIL RS-57 | Discrepant 2541564 Mixture
Control Valves |
|
| SIL RS-58 | Idle Speed Screw for |
|
| SIL RS-59 Rev2 | ||
| SIL RS-60 | ||
| SIL RS-61 | Service Information for |
|
| SIL RS-62 Rev3 | Overhaul Kits for
|
|
| SIL RS-63 Rev1 | Service Information for
|
|
| SIL RS-64 | Service Information for
|
|
| SIL RS-65 Rev1 | Service Information for |
|
| SIL RS-66 | Optional Idle Valve
for |
|
| SIL RS-67 | Idle Speed and
Mixture Adjustments for RSA Fuel Injection Systems |
|
| SIL RS-68 | Availability of
Alternate |
|
| SIL RS-69 | Service Information for
|
|
| SIL RS-70 | Service Information for |
|
| SIL RS-72 | Service Information for |
|
| SIL RS-73 | Shipping Caps,
Plugs, and O-Rings for RS/RSA Components |
|
| SIL RS-74 Rev4 | Service Information for
|
|
| SIL RS-75 Rev1 | Service Information for |
|
| SIL RS-76 | Service Information for
|
|
| SIL RS-77 | Service Information for
|
|
| SIL RS-78 | Service Information for
|
|
| SIL RS-79 | Service Information for
|
|
| SIL RS-80 | Availability of
Alternate |
|
| SIL RS-81 Rev2 | Conversion
Information for |
|
| SIL RS-82 | ||
| SIL RS-83 | ||
| Service Information for RSA-10ED1 Fuel Injection Servo Parts List 2576562-4 [1-17-08] | ||
| SIL RS-87 Rev1 | New
Regulator Plug Gasket and Increased Torque for all RSA-5 and RSA-10 Fuel
Injection Servos |
|
| SIL RS-88 | Inspection
of Regulator Hex Plug on RSA-5 and RSA-10 Fuel Injection Servos |
|
| SIL RS-89 | Service Information for RSA-10ED1 Fuel Injection Servo Parts List 2576554-3 [2-2-09] | |
| SIL RS-90 | Revision to AMC Bushing Shim Requirement Servo Parts List 2524347 [2-2-09] | |
| SIL RS-91 | Service Information for RSA-10AD1 Fuel Injection Servo Parts List 2524163-15 [3-2-09] | |
| SIL RS-92 | Clarification
of Idle Lever Stem Marking on Servo Parts List 2524500-9 |
|
| SIL RS-93 | Service Information for RSA-10ED1 Fuel Injection Servo Parts List 2524273-12 [3-5-09] | |
| SIL RS-94 | Service Information for RSA-10ED1 Fuel Injection Servo Parts List 2549038-4 [4-9-09] | |
| SIL RS-97 | Service Information for RSA-10ED2 Fuel Injection Servo Parts List 2524791-7 [4-23-09] | |
| Return to Top | ||
| Silver Hawk EX Service Bulletins | ||
| PEX-1 Rev1 | Hex Plug
383493 Coming Loose From Regulator Cover |
|
| PEX-1 Serial
Number Listing (Excel or compatible program required to view) |
||
| Warranty Request Form for Service Bulletin PEX-1 [3-17-08] | ||
| Return to Top | ||
| Manufacturers' Service Bulletins | |
| Robinson SB-55 | R44 II Fuel Control
Reorientation |
| Return to Top |
|
Copyright 1997-2009, Precision Airmotive LLC, All Rights Reserved |
|
14800 40th Ave NE Marysville, WA 98271 (360) 651-8282 |