PRECISION
AIRMOTIVE LLC (“Precision”) warrants its Factory New, experimental “Silver
Hawk EX” to be free from defects in materials and workmanship and will conform
to the Precision specifications and drawings to which they were manufactured for
a period of twelve (12) months from the date of shipment from the factory or 500
engine operating hours, whichever shall occur first.
In
certain applications, and due to various aircraft configurations, the “Silver
Hawk EX” may need a flow modification for better performance. There is a flow
modification charge if a custom calibration is requested.
Written
notice of any claimed defect or nonconformance must be received by Precision or
an authorized
(a)
Repair at its factory or at a
Precision authorized
(b)
Replace from its factory the
defective or nonconforming product or component part thereof.
(c)
Issue a credit to the first user in
the amount of the then current applicable net price for said product or
component part thereof.
Transportation
charges
(a)
Return of product or component part thereof to Precision or a Precision
authorized
(b)
IF product or component part thereof is found to be defective, Precision
will return ground, at Precisions
expense. Any expedited
freight charge will be at customer’s expense.
(c)
IF product or component part thereof is found to be free of defects all
transportation charges will be at customer’s expense
Note:
If a returned unit is found to be free of defects, the customers returned unit
may be subject to the current shop rate.
This
warranty does not extend or apply to any product or component part thereof which
has been determined by Precision or Precision authorized Product Support Center
examination to have been damaged or altered as a result of misuse, tampering,
abuse, neglect, improper storage, lack of proper maintenance or overhaul, lack
of proper filtration (where applicable), repair by any party other than
Precision or a Precision authorized Product Support Center, or other components
of the aircraft engine which are not the products of Precision.
This
warranty does not extend to any labor charges whatsoever,
including labor charges for repair, replacement, disassembly, re-assembly,
inspection, re-inspection, test or retest of the product or component part
thereof, except for the labor provided at no charge to the first user by
Precision or a Precision authorized
Warranty
and liability information: The use
of unauthorized parts in Precision Airmotive products constitutes an
alteration or modification and voids all warranties. Precision Airmotive will
accept no warranty or tort liability for products containing unauthorized
parts. The operator and/or overhaul facility responsible for installation of unauthorized
parts should expect to have the sole and full liability for property damage or
injury, including death, arising from any malfunction of the product in which
such parts are installed. The use of
Non-Aviation grade fuel Voids all Warranties.
This
warranty specifies the sole warranty obligation of Precision with respect to the
products and is in lieu of and excludes all other warranties, expressed or
implied, arising by operation of law or otherwise including the implied
warranties of merchantability and fitness for a particular purpose, and in no
event shall Precision be liable for any incidental damages, other than the
transportation charges covered by this warranty, or for any consequential or
special damages of any nature or kind.
WARNING:
The
use of unauthorized parts in any system can cause product malfunctions, which
could result in damage to, or destruction of, equipment and injury to and/or
death of personnel. Use only Precision Airmotive LLC replacement parts as
specified in the Illustrated Parts List.